More and more enterprises have started to use three roll mills for crushing mill production in order to develop their business. However, some enterprises feel that their production is not ideal when they use it, this has nothing to do with the efficiency of the three roll mills, but the way it is used can be problematic. In general, the system has a coarse material back extrusion process, the output is different from the three roll mills' throughput, I will tell you how to improve the three roll mills' output.

1. The bulk density of the extruded cake

In order to increase the output of the high-pressure ball press, it is necessary to know the bulk density of the material cake, which depends on the density of material and extrusion pressure. The greater the pressure, the greater the bulk density. For iron ore, the bulk density of high-grade iron ore is great, and the bulk density of material cake should be obtained by experiments. In general, the higher the bulk density, the higher the crushing mill yield of three roll mills, so the yield is related to the product produced.

2. Roll width of three roll mills

Increasing the output of three roll mills also allows adjustments to be made to the equipment. The width of rollers in three roll mills is proportional to the amount of throughput, and the wider the equipment, the less the rate of material leakage at the edge of roller mills, and the better the extrusion effect. Therefore, with the use of wider rollers outside the roller mill, some manufacturers of roller width even more than the diameter of the roller. The territory due to the bearing, and reducer volume restrictions, the width of the roller generally can not exceed the diameter of the roller.

3. Three Roll Mills line speed

In addition to adjusting the width of the roll, we can also adjust the linear speed of the roll surface, which directly determines the throughput, generally in order to improve the production capacity of three roll mills, will choose a higher linear speed. But the line speed can not be too high, otherwise, it will increase the vibration and wear equipment. The lower the line speed, the more stable and reliable the operation of the equipment.

If you have any questions about three roll mills, please don't hesitate to contact us and we'll be right with you.